Fiber Optic Taper Bonding Into Array
Fiber Pitch:
>4um
Form:
2×3/3×3/3×4 or on request
Seam width between the fiber tapers:
≤50um
Resolution:
25~125 lp/mm
Numerical Aperture (Small End):
1.0
Magnification Ratio:
1:2 / 1:3 / 1:4 or customized
Gross distortion:
≤2% (effective area)
A taper array utilizes several tapers assembled together, each coupled to a CCD/CMOS/OLED/LCD to produce a large-area image. The tapers are machined square or rectangular, then epoxied together to form the array.
It is be combined by 2×3 or more tapers. Array Fiber Optic Taper is applied to enlarge the display screen (OLED/LCD) and bonded to CCD/CMOS.
| wdt_ID | Attribute | Value |
|---|---|---|
| 1 | Fiber size | >4um |
| 2 | Numerical Aperture (N.A) Small End | 1.0 |
| 3 | Form | 2x3 / 3x3 / 3x4 or on request |
| 5 | Seam width between the fiber tapers | ≤50um |
| 7 | Shear distortion | ＜30um |
| 9 | Gross distortion | ≤2% (effective area) |
| 10 | Magnification | 1:2 / 1:3 / 1:4 or customized |
| 11 | Resolution | 25~125 lp/mm |
Are you interested?
Don’t hesitate and fill request form.